VMware VIEW COMPOSER 2.5 - ARCHITECTURE Manuale Utente Pagina 29

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 63
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 28
EMC Infrastructure for Virtual Desktops Enabled by EMC VNX, VMware vSphere 4.1,
VMware View 4.5, and VMware View Composer 2.5
29
DHCP Server
The DHCP Server provides the IP address, DNS Server name, gateway address, and other
information to the virtual desktops. In this solution, we enabled the DHCP role on the domain
controller.
Network design
Overview
This section describes the network design used in this solution and contains the following
topics:
Considerations
VNX for file network configuration
Enterprise switch configuration
Fibre Channel network configuration
Considerations
Physical design considerations
EMC recommends that switches support gigabit Ethernet (GbE) connections and Link
Aggregation Control Protocol (LACP), and the ports on switches support copper-based media.
Logical design considerations
This validated solution uses virtual local area networks (VLANs) to segregate network traffic of
various types to improve throughput, manageability, application separation, high availability,
and security.
The IP scheme for the virtual desktop network must be designed so that there are enough IP
addresses in one or more subnets for the DHCP Server to assign them to each virtual desktop.
Link aggregation
VNX platforms provide network high availability or redundancy by using link aggregation. This
is one of the methods used to address the problem of link or switch failure.
Link aggregation is a high-availability feature that enables multiple active Ethernet
connections to appear as a single link with a single MAC address and potentially multiple IP
addresses.
In this solution, LACP is configured on VNX, which combines eight GbE ports into a single
virtual device. If a link is lost in the Ethernet port, the link fails over to another port. All
network traffic is distributed across the active links. Figure 10 shows the LACP configuration
of the Data Mover ports on the Ethernet switch.
Vedere la pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 62 63

Commenti su questo manuale

Nessun commento