VMware VIEW COMPOSER 2.5 - ARCHITECTURE Manuale Utente Scaricare il pdf (Pagina 27)

EMC Infrastructure for Virtual Desktops Enabled by EMC VNX Series,

VMware vSphere 4.1, VMware View 4.5, and VMware View Composer 2.5 Proven Solution Guide

Fibre Channel network configuration

Introduction

Two Brocade DS5100 series FC switches are used to provide the storage network

for this solution. The switches are configured in a SAN A/SAN B configuration to

provide a fully redundant fabric.

Each server has a single connection to each fabric to provide load-balancing and

failover capabilities. Each storage processor has two links to the SAN fabrics for a

total of four available front-end ports. The zoning is configured so that each server

has four available paths to the storage array.

Zone

configuration

Single initiator and multiple target zoning are used in this solution. Each server

initiator is zoned to two storage targets on the array. The following diagram shows

the zone configuration for the SAN A fabric.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Nessun commento

VMware VIEW COMPOSER 2.5 - ARCHITECTURE Manuale Utente Pagina 27